When we went to I C T we tried to fix this game. We noticed that on the boys commands all the steps were different so we changed them to the same numbers The dragon never got found out by me.
What I did to change the scratch is to change the steps to the same emount of steps. The dragon has a command to stop it from spinning around and around but I can't find the right command. To fix it you need to change some things and try to figure out the right numbers to put in the command.
You should go on the sencing Sprite two so the underneath write follow on controll and it will follow but make sure you put when the green flag is clicked at the start
To make the boy walk evenly you set all of the steps to the same number. The dragon keeps on turning because there is a rotation of 15 degrees turn. To turn off the noise when the dragon touches the boy you need to go onto the dragon there's a sense that says when touching the boy make a noise.
where it says that the direction of 0 which said to be the up arrow, instead it needs to be -90 for the left arrow key
ReplyDeleteWhen we went to I C T we tried to fix this game. We noticed that on the boys commands all the steps were different so we changed them to the same numbers The dragon never got found out by me.
ReplyDeleteYou could try taking some of the scripts out and see what it does.
ReplyDeleteThe boy was turning the wrong way but it was very easy to fix.Apart from the dragon I was very confused on the dragon,but it was all very fun
ReplyDeleteWhat I did to change the scratch is to change the steps to the same emount of steps. The dragon has a command to stop it from spinning around and around but I can't find the right command. To fix it you need to change some things and try to figure out the right numbers to put in the command.
ReplyDeleteyou had to Change move step to all the same numbers to make it work but if it is different therefore it will not work
ReplyDeleteYou should go on the sencing Sprite two so the underneath write follow on controll and it will follow but make sure you put when the green flag is clicked at the start
ReplyDeleteTo make the boy walk evenly you set all of the steps to the same number.
ReplyDeleteThe dragon keeps on turning because there is a rotation of 15 degrees turn.
To turn off the noise when the dragon touches the boy you need to go onto the dragon there's a sense that says when touching the boy make a noise.
I changed the direction of the boy and I made more steps. It was really fun and I learned new information I can remember that will be useful.
ReplyDeleteChange sum instructions to make the boy walk.The dragon does this because the instructions aren't correct.Try to get the right instructions.
ReplyDeleteyou have to chang the bronen ones and chaned it to a right arrow and tow left arrow and that might work.
ReplyDeleteFirst, you change the steps on the boy by changing the number to 3 but I haven't worked out how to fix the dragon.
ReplyDeleteTo fix the problem on the move direction you need to change the direction from o to 90 degrease to the left and that might work
ReplyDeleteTo correct this,the scrip on both sprites have to be changed. They both need a few bits of script removed.
ReplyDeleteTo stop the space bat angle is to take a piece of the instructions out.
ReplyDelete